Profile 375 Frames - Wall Hanging Instructions - Option 1 : Moulded Hanger

Hang the frame from a nail or screw in the wall. The sawtooth pattern on the hanger allows for levelling adjustment.

On poster frames, the hanger may included a strip of foam tape to permanently hold the hanger against the backing.

This method is not recommended for use with our STAS track hanging system. See option [3] for track hanging.

Profile 375 Frames - Wall Hanging Instructions - Option 2 : Corner Hanging

Hang the frame from 2 nails or screws in the wall. The sawtooth pattern on the corners allows for some levelling adjustment.

Ensure clips are fully locked into the mouldings before hanging .

This method will not work with our STAS track hanging system. See option [3] for track hanging.

Profile 375 Frames - Wall Hanging Instructions - Option 3 : Wire Hanging

Profile frames can be hung with suitable framing wire (not included with frame kits) with only a slight modification.

Drill a small hole in the back flanges on two opposite side mouldings as shown.

The holes should be a sufficient distance from the top of the frame to ensure the wire will not protrude from the top when hanging.

String the wire throught the holes and twist to form secure loops. The wire should be properly rated to carry the weight of the frame being hung.